Dynamic In-Plane Racking Tests of Curtain Wall Glass Components
This paper is concerned with the seismic performance of 'architectural.' or 'non-structural' building elements such as glass elements in curtain wall systems. A pilot study was undertaken...

Durability and Ductility of Advanced Composites
In recent years, several fiber reinforced composites have been successfully used as prestressing materials for demonstration highway structures. Since these materials are relatively brittle...

A Model Specification for Pultruded Structural Shapes: An Industry Collaborative
The use of pultruded products is steadily increasing. To support this growth, the industry has identified the need for a collaborative effort in developing standards that form a base line...

Flexural and Shear Behavior of Combined Concrete and Graphite Epoxy Beams
An experimental and analytical study of six graphite composite beams are presented. Four of the beams incorporated a reinforced concrete slab. The composite action and the effect of concrete...

Design Optimization of an All-FRP Short-Span Bridge
The objectives of this study are: a) to determine the feasibility of designing an all-FRP bridge, and b) to demonstrate the usefulness of optimization techniques in the design of FRP superstructures....

Nonlinear Analysis of RC Beams Using High Performance FRC Matrices
The results of a nonlinear analysis model of reinforced concrete beams using a high performance fiber reinforced cement based matrix, particularly SIFCON (Slurry Infiltrated Fiber Concrete)...

Seismic Resistance of Steel Fiber Reinforced Concrete Beam-Column Joints
This paper discusses the advantages of using steel fibers in seismic resistant beam-column connections. First, the effects of fibers on the various aspects of behavior of concrete are...

Analysis and Design of SFRC Structural Elements
This paper presents and validates practical methods for flexural, shear and torsional analysis and design of fibrous reinforced concrete structural elements. The effects of both fiber...

Steel Fiber Reinforcement in Structural Application
Ribbon Technology Corporation's use of steel fiber reinforced concrete in the construction of their new manufacturing and office facility in Gahanna, Ohio. Cost savings are obtained by...

Acoustic Emission Monitoring of Stressed Composite Bars
In this study, Acoustic Emission (AE) technique is used to monitor the behavior of composite bars subjected to direct tension. Aramid Fiber Reinforced Plastics (AFRP) bars were loaded...

Performance Monitoring of Concrete Structures with Embedded Sensors
This paper describes the use of embedded fiber optic sensors to monitor the performance of reinforced concrete structures. The fiber optic sensors are capable of measuring vibrations,...

Steel Fiber Reinforced Shotcrete?An End-User Prospective
Nearly 15 years of experience demonstrates that steel reinforcing fibers in shotcrete offer considerable advantages to all end-users: designers, contractors and owners. These include demonstrable...

Large Scale Testing of Shotcrete
A large scale test program was carried out to evaluate the relative roles of steel fiber and mesh reinforced shotcrete for hard rock stabilization. The most realistic conditions in a tunnel...

What Does Bring Ductility to Steel Fibre Reinforced Shotcrete?
It is generally accepted that ductility is the main characteristic of SFRS. Tests on scale 1/1 have been conducted to determine the influence of ductility on the bearing capacity and crack...

A Comparative Study of Different Steel Fibers in Shotcrete
Two steel fiber reinforced shotcrete (sfrs) test programs have been carried out in eastern Canada using steel fibers which are available in the north American marketplace. The first program...

The Use of Yield-Line Theory in the Design of Steel-Fibre Reinforced Concrete Slabs
Using yield line calculations for steel fibre reinforced slabs a formula for the design strength of shotcrete linings is developed. The formula establishes a connection between the toughness...

Steel Fibre Reinforced Shotcrete Design
There is a need for introducing toughness and ductility in SFRS design. The Japanese Standard introduces the equivalent flexural strength, which characterizes SFRS toughness and allows...

Adapted Actions Taken at Too Low Shotcrete Quality
A tunnel contract specified quality parameters such as: thickness, compressive strength, adhesive strength, bending tensile strength and residual bending tensile strength for fibre reinforced...

Application of Shotcrete for Ground Support at Inco Mines
In 1989, shotcrete was first successfully introduced for ground support in production areas at Frood Mine. Until then the only successful application of shotcrete had been in major permanent...

Guidelines and Recommendations on Shotcrete?An International Compilation
Part of the work within the International Tunnelling Association's (ITA) working group Shotcrete Use has been to compile existing guidelines and recommendations concerning shotcrete, particularly...

 

 

 

 

Return to search